Cutting internal threads by hand rarely comes out perfectly straight, and one slightly off-angle tap can ruin an entire part. A good thread tapping machine removes that risk by guiding the tap along a fixed, aligned path every single time, so the thread comes out true to the drilled hole. For fabrication shops running large batches, this consistency is what separates a smooth production day from a pile of rejected components.
An automatic thread tapping machine takes this further by controlling depth and reverse on its own — the operator doesn’t have to judge when to stop or manually reverse the tap. This is also why the machine is sometimes called a hole threading machine, since its entire job is turning a plain drilled hole into a precise, usable thread. Buyers searching for reliable thread tapping machine Manufacturers in India are usually looking for exactly this kind of repeatable accuracy on heavy, high-volume jobs.
AXIOS thread tapping machines are built around a Mitsubishi servo motor and PLC, giving you programmable depth control with auto and peck cycles for deep or tough-to-tap holes. The 360° universal head adjusts to almost any working angle, and the bearing-supported arm joints keep movement smooth without needing regular lubrication or upkeep.
We use good-quality raw material and precision-ground casting bases in every unit, and each machine goes through testing on our shop floor before it leaves the facility. As trusted thread tapping machine Suppliers in India, AXIOS works directly with fabrication and heavy engineering units to recommend the right model for their actual job size — not a generic one-size-fits-all machine.
It cuts internal threads into pre-drilled holes, giving accurate, aligned threads that hand tapping usually can’t match consistently.
Yes, both terms describe the same process — turning a plain drilled hole into a properly threaded one, ready for bolts or fittings.
It controls depth and reverse on its own, so thread quality stays consistent from the first part to the last, without depending on operator skill or fatigue.
Yes, with the right tap and adaptor selection, AXIOS thread tapping machines handle MS, EN8D, EN19, and stainless steel jobs.
Depending on the model, they cover a wide range across MM, BSW, BSP, NPT, and UNC thread standards.
No. Auto-reverse and programmable depth control mean even a helper-level operator can run it accurately.
It’s a dedicated, lower-cost solution that doesn’t tie up your CNC’s tool holders or machine time, and can even run tapping alongside the CNC job.
AXIOS Machines manufactures and supplies thread tapping machines directly from its Rajkot, Gujarat facility, with delivery and support across India.